Tribute 4WD L4-2.5L Hybrid (2009)
4. Install the special tool.
5. Remove the engine mount bracket bolt.
-
To install, tighten to 115 Nm {11.7 kgf-m, 85 ft-lbf}.
6. Use the special tool to raise the engine 25 mm (9.98 in).
7. Remove the 3 nuts and the engine mount bracket.
-
To install, tighten to 115 Nm {11.7 kgf-m, 85 ft-lbf}.
8. Remove the A/C tube bracket nut.
-
To install, tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
9. Rotate the A/C tube brackets off of the studs.
-
Reposition the A/C tubes to access the engine mount bolt.
10. Remove the 3 bolts and the engine mount.
-
To install, tighten to 55 Nm {5.6 kgf-m, 41 ft-lbf}.
11. To install, reverse the removal procedure.
