Tribute 4WD L4-2.5L Hybrid (2009)
Timing Cover: Specifications
NOTE:The engine front cover must be installed and the bolts tightened within 4 minutes of applying the silicone gasket and sealant.
Install the engine front cover. Tighten the bolts in the sequence shown, to the following specifications:
Tighten the 8 mm bolts to..........................................................................................................................................................10 Nm {1.0 kgf-m, 89 in-lbf}.
Tighten the 13 mm bolts to........................................................................................................................................................48 Nm {4.9 kgf-m, 35 ft-lbf}.