Tribute 4WD L4-2.5L Hybrid (2009)
9. Install a new CKP sensor and the 2 bolts.
-
Do not tighten the bolts at this time.
10. Adjust the CKP sensor with the alignment tool.
-
Tighten the 2 CKP bolts to 7 Nm {0.7 kgf-m, 62 in-lbf}.
11. Connect the CKP sensor electrical connector.
12. Remove the 6 mm (0.23 in) x 18 mm (0.7 in) bolt.
13. Install the accessory drive belt and idler pulleys. See - See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt Tensioner/Service and