Tribute 4WD L4-2.5L Hybrid (2009)
Blower Motor: Service and Repair
BLOWER MOTOR REMOVAL/INSTALLATION
1. Disconnect the blower motor electrical connector.
2. Release the 2 blower motor vent tube clips and pull the vent tube down until it is disengaged from the heater core and evaporator core housing.
3. Rotate the blower motor counterclockwise to disengage it from the housing and remove the blower motor.
NOTE:The carpet below the blower motor must be slightly repositioned to remove the blower motor.
4. To install, reverse the removal procedure.
