Tribute 4WD L4-2.5L Hybrid (2009)
5. Install the A/C compressor pulley.
a. Install the A/C Compressor Pulley Installer.
b. Install the A/C compressor pulley.
NOTE:The A/C compressor pulley is a tight fit on the A/C compressor. It must be correctly aligned during installation.
6. Install the A/C compressor pulley snap ring with the bevel side out.
7. Place one nominal thickness A/C clutch disc and hub spacer inside the clutch hub spline opening.
8. Install the A/C clutch disc and hub.
9. Install the A/C compressor clutch disc and hub nut.
a. Hold the A/C clutch disc and hub with the Compressor Clutch Holding Tool.
b. Tighten the nut to 26 Nm {2.6 kgf-m, 19 ft-lbf}.