Tribute 4WD L4-2.5L Hybrid (2009)
Heater Core: Service and Repair
HEATER CORE REMOVAL/INSTALLATION
NOTE:If a heater core leak is suspected, the heater core must be leak tested before the heater core is removed. See - See: Testing and Inspection.
NOTE:Use only the approved coolant for this vehicle. See See: Specifications.
1. Remove the heater core and evaporator core housing. See See: Housing Assembly HVAC/Service and Repair/Removal and Replacement/Heater
Core And Evaporator Core Housing Removal/Installation.
2. Remove the dash panel seal.
3. Remove the heater core bracket screw and the heater core bracket.
-
To install, tighten to 2 Nm {0.2 kgf-m, 18 in-lbf}.
4. Remove the heater core.
5. To install, reverse the removal procedure.