Tribute 4WD L4-2.5L Hybrid (2009)
Cabin Temperature Sensor / Switch: Service and Repair
-
IN-VEHICLE TEMPERATURE AND HUMIDITY SENSOR REMOVAL/INSTALLATION - HYBRID
1. Detach the instrument cluster finish panel and position it away from the instrument panel to allow access to the in-vehicle temperature sensor.
CAUTION:Only position the instrument cluster finish panel away from the instrument panel enough to detach the in-vehicle temperature sensor without
stressing the attached components. If the instrument cluster finish panel is positioned too far away from the instrument panel, damage to the wire harness
or instrument cluster finish panel could result.
2. Release the 2 clips and detach the in-vehicle temperature sensor or in-vehicle temperature and humidity sensor.
3. Disconnect the in-vehicle temperature and humidity sensor electrical connector.
4. Detach the aspirator hose from the venturi at the heater core and evaporator core housing.
5. Detach the aspirator hose from the instrument panel.
