Tribute 4WD L4-2.5L Hybrid (2009)
2. Remove the lower LH center instrument panel finish panel.
3. Disconnect the electrical connectors from the DC/AC inverter.
4. Remove the 2 DC/AC inverter nuts.
-
To install, tighten to 9 Nm {0.9 kgf-m, 80 in-lbf}.
5. Remove the DC/AC inverter bolt.
-
To install, tighten to 11 Nm {1.1 kgf-m, 97 in-lbf}.
6. Remove the DC/AC inverter.
7. To install, reverse the removal procedure.