mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Air Bag Deactivation Indicator|Service and Repair|Page 6120 > < Cruise Control Switch|Service and Repair
Page 1
background image

Air Bag Deactivation Indicator: Service and Repair

PASSENGER AIR BAG DEACTIVATION (PAD) INDICATOR REMOVAL/INSTALLATION

WARNING:To reduce the risk of accidental deployment, do not use any memory saver devices. Failure to follow this instruction may result in serious
personal injury or death.
NOTE:The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is
normal operation and does not indicate a supplemental restraint system (SRS) fault.
NOTE:Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and carry out the diagnostic
procedure again.
NOTE:The supplemental restraint system (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.
NOTE:The passenger air bag deactivation indicator is part of the upper I/P center finish panel. 

1. Depower the system. See  See: Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint

System (SRS) Depowering And Repowering.

Air Bag Deactivation Indicator|Service and Repair|Page 6120 > < Cruise Control Switch|Service and Repair