Tribute 4WD L4-2.5L Hybrid (2009)
out of the I/P.
CAUTION:Do not handle the passenger air bag module by grabbing the edges of the deployment door. Failure to follow this instruction may result in
vehicle damage, equipment damage, component damage and/or system failure.
NOTE:Use care when removing the passenger air bag module from the instrument panel (I/P). The passenger air bag module can drop down during
removal and the passenger air bag module rear bracket can scratch the front of the I/P.
1. Remove the passenger air bag module.
a. Disconnect the 2 passenger air bag module electrical connectors.
b. Detach the wire harness routing clip and remove the passenger air bag module.
2. From under the rear of the passenger seat, slide and disengage the passenger seat side air bag module electrical connector locking clip, and then
release the tab and disconnect the passenger seat side air bag module electrical connector.
