Tribute 4WD L4-2.5L Hybrid (2009)
10. Position the passenger air bag module and seat the passenger air bag module deployment door clips into the I/P.
CAUTION:Do not handle the passenger air bag module by grabbing the edges of the deployment door. Failure to follow this instruction may result in
vehicle damage, equipment damage, component damage and/or system failure.
NOTE:During passenger air bag module installation, make sure all the deployment door clips are fully seated into the instrument panel.
NOTE:Use care when installing the passenger air bag module in the instrument panel (I/P). The passenger air bag module rear bracket can scratch the
front of the I/P.
11. Install the 2 passenger air bag module bolts.
-
To install, tighten to 8 Nm {0.8 kgf-m, 71 in-lbf}.
12. Close the glove compartment door
