Tribute 4WD L4-2.5L Hybrid (2009)
Alignment: Service and Repair
Front Toe Adjustment
FRONT TOE ADJUSTMENT
1. Start the engine and center the steering wheel.
2. Turn the engine off. Hold the steering wheel in the straight-ahead position using a suitable holding device.
3. Check the toe settings following the equipment manufacturer's instructions.
4. Remove the steering gear bellows clamp(s).
NOTE:Do not allow the steering gear bellows to twist when the front wheel spindle tie-rod is rotated.
5. Loosen the tie-rod end jam nut(s).
-
Clean and lubricate the nut(s) and front wheel spindle tie-rod threads.