Tribute 4WD L4-2.5L Hybrid (2009)
Spark Plug: Service and Repair
-
SPARK PLUGS REMOVAL/INSTALLATION - 2.5L
1. Remove the ignition coils. See - See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair.
2. Remove the spark plugs.
-
Tighten to 12 Nm {1.2 kgf-m, 106 in-lbf}.
CAUTION:Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.
NOTE:Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.
3. Inspect spark plugs. See See: Testing and Inspection.
4. To install, reverse the removal procedure.
-
Adjust the spark plug gap as necessary.
