Tribute 4WD L4-2.5L Hybrid (2009)
Body Control Module: Service and Repair
Smart Junction Box (SJB) Removal/Installation
SMART JUNCTION BOX (SJB) REMOVAL/INSTALLATION
Removal
CAUTION:Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
NOTE:Prior to the replacement of the module, it is necessary to upload the module configuration information to a scan tool. This information must be
downloaded into the new smart junction box (SJB) after installation. See See: Description and Operation/Module Configuration. In the event that
As-Built data is required (SJB will not communicate), all remote keyless entry (RKE) devices must be programmed to the new SJB. A minimum of 2
RKE devices are necessary to complete the configuration and turn off the flashing interior lights. The tire pressure monitoring system (TPMS)
functionality is integral to the SJB.
NOTE:The steps included in the SJB removal and installation procedure are critical to restoring the vehicle security and tire pressure monitoring