Tribute 4WD L4-2.5L Hybrid (2009)
Canister Purge Control Valve: Customer Interest
Emissions - Runs Rough/Hard Start/DTC's After Refueling
Bulletin No: 01-005/11
Last Issued: 01/31/2011
Subject:
RUNS ROUGH, HARD START AFTER REFUELING, CLICKING NOISE UNDER HOOD, AND/OR DTCs P0316, P144A, P1450, P017X, P044X,
P045X
APPLICABLE MODEL(S)/VINS
2009 Tribute Hybrid
DESCRIPTION
Some vehicles may exhibit a rough running engine, hard start after refueling, an audible clicking noise under the hood, and/or diagnostic trouble codes
(DTCs) P0316, P144A, P1450, P017X, P044X or P045X present.
Customers having this concern should have their vehicle repaired using the following repair procedure.
REPAIR PROCEDURE
1. Verify customer concern.
2. Replace the evaporative emission canister purge valve according to the online instructions on MS3 or Work-shop Manual (section 01-16
EVAPORATIVE EMISSIONS CANISTER PURGE VALVE REMOVAL/INSTALLATION - HYBRID).
3. Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION
NOTE:
^ This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.
^ This repair will be covered under Mazda's New Vehicle Limited Warranty term for a Powertrain component.
^ Additional diagnostic time cannot be claimed for this repair.
