Tribute 4WD L4-2.5L Hybrid (2009)
8. Connect the passenger seat side air bag module electrical connector and then slide and engage the seat side air bag electrical connector locking
clip.
9. Install the passenger air bag module.
a. Connect the 2 passenger air bag module electrical connectors.
b. Attach the wire harness routing clip.
CAUTION:During passenger air bag module installation, make sure the passenger air bag module wire harness routing clip is attached to the passenger
air bag module. Failure to follow this instruction may result in wiring harness damage.
CAUTION:The passenger air bag module electrical connectors are unique and cannot be reversed when connected to the passenger air bag module.
Match the electrical connector key to the keyway in the passenger air bag module. Do not force the electrical connectors into the passenger air bag
module. Failure to follow these instructions may result in component and/or connector damage.
