Tribute 4WD L4-2.5L Hybrid (2009)
1. At the roof, near the rear liftgate door, remove the child safety seat tether anchor cover.
2. Remove the bolt and the child safety seat tether anchor.
-
To install, tighten to 22 Nm {2.2 kgf-m, 16 ft-lbf}.
3. To install, reverse the removal procedure.
WARNING:It is important that the bolt/anchor be securely tightened to specification. Otherwise, the child's safety seat may not be properly secured, and
the child can be injured in case of a sudden stop or accident.
NOTE:Make sure to tighten the bolts to specification.
