Tribute 4WD L4-2.5L Hybrid (2009)
Knock Sensor: Service and Repair
-
KNOCK SENSOR (KS) REMOVAL/INSTALLATION - 2.5L
1. With the vehicle in NEUTRAL, position it on a hoist.See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Remove the intake manifold. See - See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair.
3. Remove the bolt and the knock sensor (KS).
-
To install, tighten to 20 Nm {2.0 kgf-m, 177 in-lbf}.
4. To install, reverse the removal procedure.
