Tribute 4WD L4-2.5L Hybrid (2009)
2. Feed the OCS service kit components (hose, pressure sensor, ECU, wire harness, and connectors) through the seat cushion pan opening.
CAUTION:Inspect the occupant classification sensor (OCS) assembly, seat cushion pan and support assembly for any foreign material before installing
the OCS assembly to the seat cushion pan. If any foreign material is found, remove it. Failure to do so may result in personal injury, in the event of an air
bag deployment.
CAUTION:Route the seat occupant classification sensor (OCS) components through the correct seat cushion support opening. Failure to follow these
instructions may result in component damage and/or system failure.
CAUTION:While positioning the seat cushion pan and occupant classification sensor (OCS) assembly, be careful not to damage any of the components.
Failure to follow these instructions may result in component damage and/or system failure.
