Tribute 4WD L4-2.5L Hybrid (2009)
6. Rotate the front wheel spindle tie-rods to increase or decrease the front toe.
7. Tighten the tie-rod end jam nut(s) to 40 Nm {4.0 kgf-m, 30 ft-lbf}.
CAUTION:Hold the tie-rod end stationary with a wrench while tightening the nut, or damage to the boot can occur.
NOTE:Do not disturb the toe settings while tightening the nut(s).
8. Install the steering gear bellows clamp(s).
