Tribute 4WD L4-2.5L Hybrid (2009)
4. Using a suitable press and the special tool, press the inner bearing race from the wheel knuckle.
NOTE:This step may not be necessary if the inner wheel bearing race remains in the wheel knuckle after removing the wheel hub.
5. Remove the brake shoes. See See: Brakes and Traction Control/Drum Brake System/Brake Shoe/Service and Repair.
6. Remove the parking brake cable bracket-to-control arm bolt.
7. Unclip the wheel speed harness retainer from the parking brake cable and disconnect the cable from the brake backing plate.
8. Remove the wheel speed sensor bolt and the 2 wheel speed sensor harness bolts.
9. Disconnect the wheel speed sensor from the wheel knuckle, and position the sensor and harness aside.
10. Remove the stabilizer bar link lower nut and disconnect the link from the wheel knuckle.
-
Discard the nut.
11. Remove the coil spring. See See: Suspension Spring ( Coil / Leaf )/Service and Repair/Removal and Replacement/Spring Removal/Installation
[Rear Suspension].
12. Remove and discard the lower ball joint nut.
13. Index-mark the notch on the cam nut adjustment cam.
14. Remove and discard the wheel knuckle bolt and cam nut.
15. Remove the wheel knuckle.
16. Remove the wheel bearing. See - See: Wheel Bearing/Service and Repair/Wheel Bearing Removal/Installation [Rear Suspension].
Installation
1. Install the wheel bearing. See - See: Wheel Bearing/Service and Repair/Wheel Bearing Removal/Installation [Rear Suspension].
2. Position the halfshaft into the wheel hub and install the wheel knuckle.
-
Hold the cam nut stationary and loosely install a new wheel knuckle bolt and cam nut.
CAUTION:The joint area must be free of foreign material to make sure of correct clamping.
NOTE:Align the notch on the cam nut with the index marks.
NOTE:Do not tighten the wheel knuckle bolt at this time.
3. Position the lower ball joint into the wheel knuckle and install the new lower ball joint nut.
-
Tighten to 63 Nm {6.4 kgf-m, 46 ft-lbf}.
4. Install the coil spring. See See: Suspension Spring ( Coil / Leaf )/Service and Repair/Removal and Replacement/Spring Removal/Installation
