Tribute 4WD L4-2.5L Hybrid (2009)
Wheel Bearing: Service and Repair
Wheel Bearing Removal/Installation [Rear Suspension]
-
WHEEL BEARING - ALL WHEEL DRIVE (AWD) REMOVAL/INSTALLATION
Removal
1. Remove the wheel knuckle. See - See: Rear Knuckle/Service and Repair.
2. Remove the wheel bearing snap ring.
3. Remove the 4 bolts and the brake drum backing plate.
4. Position the wheel knuckle on a suitable press.
-
Using the special tools or equivalents, position the wheel knuckle on a suitable press and press the wheel bearing from the wheel knuckle.
Installation
