Tribute 4WD L4-2.5L Hybrid (2009)
Seals and Gaskets: Service and Repair
Differential Fluid Seals - RH Removal/Installation
--
DIFFERENTIAL FLUID SEALS - RH REMOVAL/INSTALLATION - HYBRID
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Turn the ignition to the OFF position.
3. Remove the retainers and remove the LH splash shield.
4. Remove the drain plug and drain the transaxle fluid.
5. Remove the RH halfshaft. See See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front Axle / Front Drive Halfshafts
Removal/Installation.
