Tribute 4WD L4-2.5L Hybrid (2009)
Flywheel: Initial Inspection and Diagnostic Overview
FLYWHEEL RUNOUT CHECK
CAUTION:Do not clean the dual mass flywheel with any kind of fluid. Use a dry cloth only or damage to the dual mass flywheel may occur.
CAUTION:Do not clean the gap between the primary and secondary mass. Only clean the bolt connection surface and the clutch surface or damage to
the flywheel may occur.
1. Check the transaxle fluid level and fill to the correct level as necessary.
2. With the engine operating at idle and the transaxle in NEUTRAL, listen and check for unacceptable noise. Determine if any unacceptable noise is
reduced when the clutch pedal is depressed. See See: Component Tests and General Diagnostics/Flywheel Inspection.
