Tribute 4WD V6-3.0L DOHC (2003)
5. Open the four A-pillar passenger assist handle covers.
6. Remove the two A-pillar passenger assist handles.
1. Remove the four bolts.
2. Remove the two A-pillar passenger assist handles.
7. Remove the two windshield side garnish mouldings.
8. If equipped, remove the roof opening panel moulding.
NOTE: Inspect the safety belt D-ring cover for damage. If the safety belt D-ring cover does not remain in place, install a new cover.
9. Remove the safety belt D-ring covers.
