Tribute DX 2WD L4-2.0L (2001)
Lifter / Lash Adjuster: Service and Repair
VALVE TAPPETS
Removal
1. Remove the camshafts.
Caution: If the camshaft and valve tappets are to be reused, mark the location of the valve tappets to make sure that they are assembled in their
original positions.
2. Remove the valve tappets from the cylinder head.
3. Inspect the valve tappets.
Note: Make sure the valve tappets are installed in their original locations.
4. To install, reverse the removal procedure.
1. Lubricate the valve tappet with SAE 5W-20 Motor Oil.