Tribute DX 2WD L4-2.0L (2001)
Note: Make sure the correct (second) notch in the pulley is indexed to the lower cylinder block.
8. Rotate the crankshaft clockwise against the peg to bring it to TDC (No. 1 cylinder).
9. Loosen the water pump pulley bolts.
10. Remove the timing belt covers.
11. Remove the water pump pulley.
12. Remove the accessory drive belt idler pulley.
Note: Installation of the alignment tool into the exhaust camshaft may require the camshafts to be rotated clockwise slightly.
