Tribute DX 2WD L4-2.0L (2001)
2. Open the glove box past its stops.
3. Through the glove box opening toward the center of the instrument panel (I/P), disconnect the passenger air bag electrical connector.
1. Push to release the passenger air bag electrical connector locking clip.
2. Disconnect the passenger air bag electrical connector.
4. Attach the air bag to the vehicle harness side of the passenger air bag electrical connector.
5. Remove the steering wheel access cover.
6. Disconnect the driver air bag electrical connector.
1. Separate the driver air bag electrical connector pin-type retainer from the steering wheel bracket.
2. Push to release the driver air bag electrical connector locking clip.
3. Disconnect the driver air bag electrical connector.
7. Attach the air bag to the air bag sliding contact electrical connector at the top of the steering column.
8. Disconnect the driver seat safety belt buckle pretensioner and side air bag electrical connectors.
9. Attach the restraint system diagnostic tools to the driver seat floor electrical connectors.
1. Attach the air bag to the safety belt buckle pretensioner floor electrical connector.
2. Attach the air bag to the side air bag floor electrical connector.
10. Disconnect the passenger seat safety belt buckle pretensioner and side air bag electrical connectors.
11. Attach the restraint system diagnostic tools to the passenger seat floor electrical connectors.
1. Attach the air bag to the safety belt buckle pretensioner floor electrical connector.
2. Attach the air bag to the side air bag floor electrical connector.
12. Connect the battery ground cable. For additional information, refer to BATTERY DISCONNECT.
