Tribute DX 2WD L4-2.0L (2001)
6. Remove the power steering pressure line bracket bolt.
7. Disconnect the power steering low pressure hose.
8. Remove the bolts and the power steering pump.
9. Using the special tool, remove the power steering pump pulley.
Installation
Caution:
-
Install a new power steering pump pulley after the second removal and installation.
1. Inspect the pulley for paint marks in the web area near the hub. If there are two paint marks, install a new pulley. If there is no paint or one paint
mark, use a paint pencil to mark the web area of the pulley near the hub. Using the special tool, install the power steering pump pulley.