Tribute DX 2WD L4-2.0L (2001)
2. Using the special tool, position the halfshaft into the front wheel knuckle.
3. Install the lower ball joint pinch bolt and nut.
Note: If the slot in the nut is not aligned to the hole, tighten the nut as necessary to align.
4. Install the tie rod end.
1
Position the tie rod end.
2
Install the tie rod end nut and cotter key.
5. Install a new front axle wheel hub nut.
6. Install the front brake disc.
7. Check and refill the transaxle fluid.
Halftshaft
