Tribute DX 4WD L4-2.0L (2001)
Cruise Control Servo Cable: Service and Repair
SPEED CONTROL CABLE
Removal and Installation
NOTE: The cruise control actuator cable is not adjustable.
1. Disconnect the cruise control cable from the throttle control linkage and bracket.
2. Release the cruise control cable cap.
1. Depress the cruise control cable cap retaining tab.
2. Rotate the cruise control cable cap.
3. Remove the cruise control cable.
1. Depress the spring retainer.
2. Slide the core wire end out of the cruise control servo pulley and remove the cruise control cable.
4. To install, reverse the removal procedure.