Tribute DX 4WD L4-2.0L (2001)
Hose/Line HVAC: Service and Repair
Condenser to Evaporator Line
CONDENSER TO EVAPORATOR LINE
Removal and Installation
1. Remove the A/C pressure cut-off switch.
2. Remove the evaporator core orifice.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
3. Disconnect the condenser to evaporator line from the A/C evaporator core. For additional information, see SPRING LOCK COUPLING.
4. Remove the front bumper cover.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
5. Remove the nut and disconnect the condenser to evaporator line from the A/C condenser core and remove the condenser to evaporator line.
6. To install, reverse the removal procedure.
1. Lubricate the O-ring seals with PAG Compressor Oil. For additional information, see REFRIGERANT OIL ADDING.