Tribute DX 4WD L4-2.0L (2001)
Wheel Bearing: Service and Repair
Rear
Removal and Installation
1. Remove the brake shoes.
Caution: Apply anti-seize compound to the halfshaft before removing the nut to avoid damaging the halfshaft.
2. Remove the rear halfshaft nut and discard.
3. Using the the special tool, loosen the halfshaft from the wheel hub.
4. Using the special tools, remove the wheel hub.
Note: This step may not be necessary if the inner wheel bearing race remains in the wheel knuckle, after removing the wheel hub.