Tribute DX 4WD L4-2.0L (2001)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Air Cleaner Outlet Pipe
1. Disconnect the air cleaner outlet pipe at the mass air flow / intake air temperature sensor.
1. Unclip the throttle cable from the outlet pipe.
2. Loosen the screw clamp and disconnect the pipe.
2. Remove the outlet pipe.
1. Disconnect the outlet pipe from the throttle body.
2. Unclip the hose from the outlet pipe.
3. Disconnect the crankcase vent tube and remove the air cleaner outlet pipe.
NOTE: The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.
3. To install, reverse the removal procedure.
