mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Fuel Vapor Vent Valve Assembly <--> [Rollover Valve, Fuel Tank] > < Diagram Information and Instructions|Page 2323

Tribute DX 4WD L4-2.0L (2001)

Page 1
background image

Resonator: Service and Repair

Removal and Installation

1. Remove the left front wheel.

2. Remove the seven pin-type retainers and four screws and position aside the left inner fender splash shield.
3. Remove the bolt and remove the intake air resonator.

NOTE:  Make sure the front rubber grommet is seated in the bracket.

4. To install, reverse the removal procedure.

Fuel Vapor Vent Valve Assembly <--> [Rollover Valve, Fuel Tank] > < Diagram Information and Instructions|Page 2323