Tribute DX 4WD L4-2.0L (2001)
10. Remove the lower shock absorber nut.
Note: It may be necessary to hold the ball joint stud to keep it from turning while removing the nut.
11. Disconnect the lower ball joint.
1
Remove the nut.
Note: It may be necessary to hold the ball joint stud to keep it from turning while removing the nut.
12. Disconnect the upper ball joint.
1
Remove the nut.
Note: Note the position of the spring insulator and spring for installation.
13. Remove the spring.
1
Lower the support to the wheel knuckle.