Tribute DX 4WD L4-2.0L (2001)
14. Position the inboard halfshaft boot.
1
Position the inboard halfshaft boot.
2
Position the inboard halfshaft boot clamp.
15. Remove any excess air trapped in the halfshaft boot using a cloth covered screwdriver after adjusting the halfshaft boot spacing.
16. Using the special tool, install two new outboard joint boot clamps.
17. Install the front wheel halfshaft.
Halfshaft Joint
Disassembly
1. Remove the halfshaft.
2. Secure the halfshaft and constant velocity (CV) joint in a vise using protective jaw covers.
