Tribute DX 4WD V6-3.0L DOHC (2002)
Sunroof / Moonroof Motor: Service and Repair
ROOF OPENING PANEL MOTOR
Removal
1. Close the root opening panel.
2. Remove the headliner.
3. Remove the roof opening panel motor.
1. Disconnect the electrical connectors.
2. Remove the bolts.
3. Remove the roof opening panel motor.
Installation
NOTE: The roof opening panel should be in the closed position.
1. Connect the roof opening panel motor electrical connector.
2. With the motor still removed, bump the roof opening panel switch one time only towards the close or vent open position.
3. Install the roof opening panel motor.
1. Position the roof opening panel motor.
2. Install the bolts.
4. Check for correct operation of the roof opening panel motor.
5. Install the headliner.