Tribute DX 4WD V6-3.0L DOHC (2002)
16. Connect the special tool to the instrument panel harness side of the passenger air bag module electrical connector.
17. Connect the battery ground cable. For additional information, refer to BATTERY DISCONNECT.
18. Prove out the air bag system. For additional information, refer to AIR BAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL
RESTRAINT SYSTEM (SRS).
19. Remove the seat track to floor nuts.
20. Position the passenger seat rearward.
CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle may result
in damaged components.
21. Remove the passenger seat.
1. Remove the seat track to floor bolts.
2. Remove the passenger seat.
22. Remove the outboard seat cushion side shield.
1. Remove the seat backrest lever handle.
2. Remove the screw.
3. Remove the shield.
