Tribute DX 4WD V6-3.0L DOHC (2002)
with enough force to cause personal injury. Never attempt to catch the piston by hand as it comes out of the bore. Failure to follow these
instructions may result in personal injury.
Caution:
^
Do not use a screwdriver or any other similar tool to pry the piston out of the bore. Piston damage could result.
Note:
^
Inspect the piston for wear, rust, or pits If any of these conditions exist, a new piston must be installed.
4. Remove the caliper piston
1. Position a block of wood between the piston and the disc brake caliper.
2. Apply compressed air to caliper to remove piston.
5. Remove the bleeder screw
Caution:
^
Use a plastic or wooden pick to remove the piston seal from the caliper bore. A metal tool may scratch or nick the seal groove, which could
result in a seal leak.
Note:
^
Inspect the caliper bore for wear, rust, or pits if any of these conditions exist, do not hone; a new caliper must be installed.
6. Remove the piston seal.
Assembly
Caution:
