mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Brake Master Cylinder|Page 4390 > < Brake Master Cylinder|Page 4388
Page 1
background image

Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir

Removal

Warning:  
^

Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake fluid
contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water
and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.

Caution:  
^

Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with water.

1. Disconnect the fluid level electrical connector.
2. Using a suitable suction device, drain the brake master cylinder degas bottle.

3. If equipped with manual transaxle, disconnect the clutch master cylinder feed.

4. Remove the brake master cylinder degas bottle.

Installation

Note:  Whenever installing a new brake master cylinder degas bottle, install new seals.

Brake Master Cylinder|Page 4390 > < Brake Master Cylinder|Page 4388