Tribute DX 4WD V6-3.0L DOHC (2002)
1. Clean all dirt or foreign material from the fittings.
CAUTION: Use only new purple O-ring seals. The use of any O-ring seals other than specified may result in intermittent leakage during vehicle
operation.
2. Install the O-ring seal.
1. Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems).
3. Lubricate the inside of the fittings with PAG Refrigerant Compressor Oil (R-134a Systems).
NOTE: When correctly assembled, the male and female fittings should be flush.
4. Assemble the male and female fittings together.
5. Charge the system. Refer to AIR CONDITIONING (A/C) SYSTEM EVACUATION AND CHARGING.