Tribute DX 4WD V6-3.0L DOHC (2002)
Canister Purge Solenoid: Testing and Inspection
CANISTER VENT SOLENOID CLOSING PROCEDURE
CAUTION: The canister vent solenoid must not be energized for more than nine minutes at one time. Once the canister vent solenoid is energized and
de-energized, adequate time must be allowed for the component to cool adequately. Failure to allow the component to cool may create a false failure in
the diagnostics, causing unnecessary repairs.
1. Connect the WDS or equivalent Tester and select the output test mode.
2. Select the EVAPCU PID.
3. Select the ALL OFF mode.
4. Close the canister vent solenoid by pushing the START button on the WDS or equivalent Tester.