mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Evaporative Canister Filter|Service and Repair|Page 2671 > < Canister Purge Solenoid|Testing and Inspection
Page 1
background image

Evaporative Canister Filter: Service and Repair

DUST SEPARATOR

Removal and Installation

WARNING:  Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly
flammable mixtures are always present and may be ignited, resulting in possible personal injury. Failure to follow these instructions may result
in personal injury.

WARNING:  The evaporative emission system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still
presents the danger of explosion or fire. Disconnect the battery ground cable from the battery to minimize the possibility of an electrical spark
occurring, possibly causing a fire or explosion if fuel vapor or fuel liquid is present in the area. Failure to follow these instructions may result in
personal injury.

1. Disconnect the battery. Refer to BATTERY DISCONNECT.
2. Raise and support the vehicle. Refer to LIFTING.

3. Disconnect the EVAP canister outlet tube.

4. Disconnect the canister vent solenoid electrical connector and the remote canister vent hose.

5. Remove the EVAP canister bracket assembly.

Evaporative Canister Filter|Service and Repair|Page 2671 > < Canister Purge Solenoid|Testing and Inspection