Tribute DX 4WD V6-3.0L DOHC (2002)
INSTALLATION
1.
Feed the new cable through the dash panel and fully seat the grommet.
2.
Install and connect the accelerator cable as follows.
a.
Connect the cable to the throttle body by rotating the cam and sliding the cable barrel into the cam.
b.
Attach the accelerator cable to the clip located on the brake booster vacuum hose.
c.
Secure the accelerator cable to the bracket # 1 by inserting it and rotating the cable housing 45 degrees to lock it in place.
d.
Position the accelerator cable in bracket # 2 and, using a suitable tool, bend down the tab to retain the cable while ensuring the cable moves
freely in the bracket.
3.
Connect the accelerator cable to the pedal.
