Tribute DX 4WD V6-3.0L DOHC (2002)
a.
Position the plunger rearward and install the accelerator cable into the pedal.
b.
Install the rubber plunger ensuring the plunger is seated properly.
4.
Install the appearance cover.
5.
Check for free movement of the accelerator pedal and that there is no binding.
C. AUTHORIZED MODIFICATION LABEL INSTALLATION
Complete an 'Authorized Modification Label" with the Recall number written on the sticker and affix it to the vehicle's hood. Refer back to the
illustration under "A. VEHICLE INSPECTION PROCEDURE".
