Tribute DX 4WD V6-3.0L DOHC (2002)
Body Control Module: Service and Repair
Customer Preference Items
NOTE: If using the NGS, select Module Configuration and Programming, then follow the screen prompts.
NOTE: Make sure module is listed as supporting customer preference items and supports the specific item to be configured; refer to MODULE
CONFIGURATION.
1. Select Service Bay Functions on the NGS Tester.
2. Select the module that contains the customer preference item to be programmed. Refer to MODULE CONFIGURATION.
3. Select Customer Preference Items on the NGS Tester.
4. Select Module Option Content.
5. Select the item to be enabled or disabled.
6. Enable or disable the item as necessary to reflect the customer preference.