Tribute DX 4WD V6-3.0L DOHC (2002)
Oxygen Sensor: Service and Repair
Catalyst Monitor Sensor
CATALYST MONITOR SENSOR
Removal and Installation
LH
1. Raise and support the vehicle.
2. Disconnect the catalyst monitor sensor electrical connector.
NOTE: If necessary, lubricate the catalyst monitor sensor with Penetrating and Lock Lubricant to aid in removal.
3. Using the special tool, remove the catalyst monitor sensor.
NOTE: Apply a light coat of High Temperature Nickel Anti-Seize Lubricant to the threads of the catalyst monitor sensor to aid in installation.
4. To install, reverse the removal procedure.
RH
1. Disconnect the catalyst monitor sensor electrical connector.
2. Raise and support the vehicle.