Tribute DX 4WD V6-3.0L DOHC (2002)
13. Remove the seat backrest trim cover.
1. Placing a hand between the seat backrest trim cover and pad, carefully separate the hook and loop strips.
2. Roll up the seat back trim cover, in an inside out fashion, and remove the seat backrest trim cover.
14. Remove the seat backrest pad from the frame.
15. Separate the side air bag wiring harness pin-type retainers from the seat back frame.
NOTE: If installing a new side air bag module, use new retaining nuts. If the same side air bag module is to be reused, then reuse the side air bag
module retaining nuts.
16. Remove the side air bag module.
1. Remove the nuts.
