Tribute DX 4WD V6-3.0L DOHC (2002)
9. Remove the rear hatch scuff plate.
1. Remove the pin-type retainers.
2. Pull up to release the retaining clips and remove the rear hatch scuff plate.
10. Pull out to release the retaining clips and remove the rear quarter trim panel.
11. Remove the rear safety belt retractor.
1. Using the special tool, remove the bolt.
2. Remove the rear safety belt retractor.
Installation
1. Install the rear safety belt retractor.
1. Position the rear safety belt retractor to the C-pillar.
2. Using the special tool, install the bolt.
